Baumer O200 Інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари Baumer O200. Baumer O200 34 сторінки. Sensors with io-link

IO-Link Communication Mode

2.2

The IO link communication mode is initiated by the master (PLC) with a standardized command sequence,

this sequence is called "wake-up". After successful completion of the wake-up sequence the IO link

communication starts.

Data is the most important basis for process and product optimization. With the help of IO-Link, valuable

additional data can be made accessible. Sensor and Master can exchange two different types of data (cyclic

and acyclic data).

More information can also be found here.

2.2.1

Transmitted in real time. They are used for process control in the automation system. These can also be

transferred to other IT systems via IO-Link.

2.2.2

Through this data stream, sensors (IO devices) can be parameterized. Additionally this data stream also

allows to transmit data for identification and analyzation. The figure below shows the different types of data

and their value for the application.

Figure 2 Different IO Link data streams

en_BA_O200_IO-Link_V1.docx

15.08.2018/

4/34

Baumer Electric AG

Frauenfeld, Switzerland