Com World CMD-RF1080P Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Конвертер мультимедіа Com World CMD-RF1080P. Com World CMD-RF1080P 19 сторінок. Pal-secam to ntsc video converter with full hd 1080p

Друкувати сторінку

( 1 ) Power On/Off

( 2 ) MUTE: To mute the audio.

( 3 ) Input:

To switch between the different input sources.

Cycles between with each push of the button:

( 4 ) TV

: Hot key for Quick RF input selection. When you press this key the

CMD-RF1080p box is changed to RF input (TV tuner) mode.

( 5 ) HDMI

: Hot key for Quick HDMI input selection. When you press this key the

CMD-RF1080p box is changed to HDMI input mode.

( 6 ) SELECT key: Use as confirmation key.

Only valid under MENU operation and PIP function

( 7 ) Volume UP/Down：

Press "◄"or"►" to adjust the volume of signal source

( 8 ) Channel UP/Down：

active in RF input mode (TV mode).

( 9 ) MENU: To access the settings of this CMD-RF1080p box. There are

many options that user can adjust to meet their need.

( 10 ) EXIT: To exit the menu.

( 11 ) Numeric key 0~9：

when in RF input mode (TV mode).

NOTE:

1. If you want to watch Channel number above 100, please input the 3 digit number

directly.

( 12 ) Favorite channel scan ( FC SCAN )

( 13 ) Favorite channel memory ( FC MEMO)

( 14 ) Return to Last Channel (RCL)：

you were watching.

( 15 ) OSD：

Press this key, there will a pop-up window in the upper-left side on your

screen which will show the channel information and resolution.

Re-push this key or press VOL+/- key to release.

TV→ Video→ YPbPr→ HDMI

Press "▲" or "▼" to select the adjacent channel. Only

You can direct press the number key to select the channel

see P.16

If you want to return to previous channel