Baumer OADM 20U5 Series Посібник користувача - Сторінка 24
Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари Baumer OADM 20U5 Series. Baumer OADM 20U5 Series 30 сторінок. Laser distance sensor
Друкувати сторінку
What can you do if you have transparent, semi-transparent and highly reflective objects?
The measuring principle desires an object that reflects the light diffusely. Semi-transparent, transparent and
highly reflective objects do not have this feature.
When measuring on semi-transparent objects, the light enters the object and so the measured distance is
larger than the actual distance is.
Light will pass through a transparent object so a measuring signal is not available.
A highly reflective object only has a direct reflection and it is not possible to work with it. For such an
application, ask the Baumer electric sales staff.
to measure these objects, it is only possible if you place a diffuse reflecting surface on the object (sticker,
etc.)
Semi transparent objects:
the light enters the object.
the measured distance is larger than the
real distance
5 Alarm output
The alarm output indicates when an object is outside the measuring range or when the received signal
cannot be used for measuring distance. In this case, the output shows 0 V (4 mA).
The sensor has no internal hold function if measured values are missing. It provides real time measuring.
In some critical applications (poorly reflective objects), the sensor sometimes loses the signal and the output
signal drops down to 0 V (4 mA). For such applications, we recommend to use the alarm output. Before
reading the analog signal, observe the alarm output; if it is active, the analog signal must be invalid.
BA_OADM20x5.doc ANW_81253059
03.07.2017
!
Transparent objects:
The light passes the object without a
diffuse reflection.
No measurement is possible
Highly reflective objects:
Only direct reflection
No measurements possible
24/30
Baumer
Frauenfeld, Switzerland