Electric Bike Company X Посібник із швидкого старту - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Велосипед Electric Bike Company X. Electric Bike Company X 12 сторінок.
Також для Electric Bike Company X: Посібник (12 сторінок)
Друкувати сторінку
Method 1 to charge C & S models
9
Locate the power cord on the left side of the rear rack battery
case and extend it to plug into a 3-prong power outlet.
Method 2 to charge C & S models
Purchase the 3.5 amp supercharger to charge your bike.
Connect the power cord to the charger. Plug the power cord
into a 3-prong outlet and the charging port of your charger to
the charging port of your bike, as shown in figure 13. The LED
lights will turn red while charging and green once charging is
complete.
Note: You can remove the battery from the rear rack case to charge it.
Using Pedal Assist:
Using the Up and Down arrows, you can set Pedal Assist from 0 to 5 speed modes.
1 is the slowest and 5 is the fastest. With Pedal Assist Mode On, the motor will now
turn on when you begin pedaling, and you will not need to use the throttle. You do
have the ability, however, to increase your speed with throttle application while using
Pedal Assist Mode.
Note: It takes about 1 pedal rotations before Pedal Assist kicks in and turns on the
motor.
Important note: In the beginning, when you are getting used to the bike, it is
always best to start out in Mode 1 and move up to the faster modes as you are
riding. The motor increases in power as you move up the modes and will go fast
in you are not expecting it. In zero mode, the Pedal Assist and the throttle are not
active.
10
Model C & S