Asus AAM6020BI-T4 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Мережевий маршрутизатор Asus AAM6020BI-T4. Asus AAM6020BI-T4 38 сторінок. Cpe (customer premises equipment) adsl 4 port router

Друкувати сторінку

Setting up your CPE

This section will guide you through your CPE's configuration. The CPE is shipped with a standard default

bridge configuration; for most users, you may want to change the CPE from a bridge to a router.

4.1

Log into your CPE

To configure your CPE, open your web browser. You may get an error message at this point; this is normal.

Don't panic. Continue following these directions. Type the default IP address (192.168.1.1) Press the

Enter key and the following screen, shown in Figure 1 will appear. The default user name is Admin (case

sensitive) and the password is Admin (case sensitive).

Note: Before setting up your CPE, make sure you have followed the quick start guide. You should have

your computers configured for DHCP mode and have proxies disabled on your browser. Also if you access

the router, and instead of getting a login screen, the browser instead displays a login redirection screen, you

should check your browser's setting, and verify that JavaScript support is enabled. Also, if you do not get

the screen shown in Figure 1, you may need to delete your temporary Internet files (basically flush the

cached web pages).

4.2

Home screen

The first screen (Figure 2) that appears (after the log in screen) is the Home screen. From this screen the

user can setup the modem (configure the LAN and WAN connection(s), configure the advanced

configuration options within the modem (security, routing, and filtering), access tools that are helpful for

debug purposes, obtain the status of the modem, and view the extensive online help.

The basic layout of the Home page consists of a page selection list across the top of the browser window.

The footer displays CPE status, connection information, and other useful information. The center display is

where most of the configuration will take place.

Figure 1 (Log-in Screen)

AAM6030BI User Manual