Asus AAM6030EV Посібник з швидкого налаштування Посібник з швидкого налаштування - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування Посібник з швидкого налаштування для Мережевий маршрутизатор Asus AAM6030EV. Asus AAM6030EV 13 сторінок.

Друкувати сторінку

Since we are using NO security you must ensure that the WEP setting shows disabled. Remember to click on submit and then

save if you change any setting.

Finally click on Reset Modem to reboot the router. Then, after the router has restarted goto the IEEE/Status page:

Now you must check the settings of your wireless clients to ensure their setup exactly matches the router setup as you've just

Also check that the Preamble mode for your clients match the router. The default for the router is 'Long' so your clients must

also be set to 'Long'

done above. One thing you must check is that your clients are set in

'Infrastructure' mode. This means that the clients expect to communicate

via the access point built into the router. The alternative setup is called

Ad-hoc or sometimes peer-to-peer. With Peer-to-peer client setup each

clients expects to talk to another client. If the clients are set this way they

won't be able to communicate with the VI router (A good analogy to use

for the different between Infrastructure and Peer-to-peer is to compare

with using normal copper network cables to connect clients together. If

the clients are connected via a network hub then a standard CAT5 LAN

cable is required. But, if the connect direct i.e. a cable connected directly

from the back of one PC to the other PC, then they need to use a cross-

over LAN cable; the normal LAN cable won't work).

- 6 -