Baumer R600V.DAH5 Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари Baumer R600V.DAH5. Baumer R600V.DAH5 32 сторінки. Off-highway distance radar sensor
Друкувати сторінку
NOTE
For highly structured surfaces (rough terrain, stubble, etc.) Baumer rec-
ommends the usage of "ground & crop radar sensor" family
(R600V.DAE0-11209335, R600V.DAE0-11188367)
The sensor may be integrated into vehicles with 12VDC and 24VDC vehicle power supplies,
and provides a CAN SAE J1939 interface with a set speed of 250kbit/sec (may be changed
to 500kbit/sec). The output rate defaults to 50ms, but may be varied between 10ms and
1000ms. High visibility LEDs displays the sensor status, even in bright ambient light.
1.3.2.
Audience
This manual is intended for original equipment manufacturers (OEMs), or system integra-
tors; but not the end-users of equipment. It is the responsibility of the OEM / system integra-
tor to provide a user manual where relevant information from this manual is passed on, if it
either directly affects the safety or indirectly as discovered during a safety assessment of the
consequences of this product's integration. The Baumer "Off-highway Distance Radar" sen-
sors are not intended for safety applications and potentially explosive atmospheres. The
OEM or system integrator must ensure the safety of the equipment on which this product is
used.
The manual is written based on current information. Baumer reserves the right to update
products, documentation and its manuals if better information becomes available.
CAUTION
This product must not be used in safety applications and in poten-
tially explosive atmospheres.
1.3.3.
Application Policy
Baumer products are applicable to a wide range of applications and / or end-use cases.
Baumer cannot know all possible conditions under which products are installed, used, and
operated. Every application and / or use-case is unique. The suitability and functionality of a
Baumer product and its performance under different applications and / or end-use cases can
only be verified by testing, and shall ultimately be the responsibility of the Baumer customer
using a Baumer product. When the product configuration (software version, electronics revi-
sions, mechanical revisions, etc.) is changed the customer needs to validate and verify the
Baumer product to ensure the proper function in the application and / or end-use case.
NOTE
The original equipment manufacturer or system integrator must ensure
the suitability of this product in the application and / or use case through
extensive testing.
Intellectual property rights may exist for some applications and / or end-use cases that may
affect the usage and/or placing on the market of machines manufactured by the OEM using
R600V.DAH5_manual_1.5 (EN).docm
Last Update: 03 Jul 20
Manual R600V.DAH5 (EN)
Page 5 of 32