Baumer R600V.DAH5 Посібник з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари Baumer R600V.DAH5. Baumer R600V.DAH5 32 сторінки. Off-highway distance radar sensor
Друкувати сторінку
2.1.2.
Reference Target
All data sheet specifications are based on a flat high-reflectance target (a metal plate with
dimensions of 100mm by 100mm). The zero point for the measurement is on the tip of the
lens.
2.1.3.
Mounting
A mounting plate with a flatness of better than 0.2mm per 100mm shall be used. Baumer
recommends soft steel as material to match specified mounting torque. For direct mounting
(thread in plate) Baumer recommends a thickness of the steel plate of at least 6mm. For
mounting on a thinner soft steel plates (≥3mm) flange nuts must be used instead.
Fig 2
Mounting on a thick soft steel plate (≥6mm).
Fig 3
Mounting on a thin soft steel plate (≥3mm)
It is recommended to use M6 screws per MBM 10105. The mounting torque for 10.9 (prop-
erty class) screws must be within 12Nm...15Nm, and for 8.8 (property class) screws it must
be within 10Nm...12Nm. For the mounting pattern and available tool space for tightening the
R600V.DAH5_manual_1.5 (EN).docm
Last Update: 03 Jul 20
Manual R600V.DAH5 (EN)
Page 9 of 32