Douglas GCW-1 Посібник з експлуатації - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Промислове обладнання Douglas GCW-1. Douglas GCW-1 18 сторінок. Water washing machine
Друкувати сторінкуGCW-1
Programming the Auto Fill
Before starting, make sure there is no water in the machine and that the drain valve is closed.
Turn the Off/On/Fill switch to the On position, but make sure not to turn all the way to Fill.
Locate the Program button on the PC board.
This black button is located on the right hand side just below the Program LED and labeled with the letters
PGM.
Push in the PGM button but do not hold the button down, as it will then execute a test Mode.
When the Program light located above the button begins to flash, turn the Off/On/Fill switch to the Fill
position.
The solenoid valve then opens and the machine begins to fill.
When the water reaches the overflow level, turn the Off/On/Fill switch again to the Fill position.
Observe that the Fill Time is set.
15
DougMac.com