Baumer Hubner Berlin HMG 11 Інструкція з монтажу та експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з монтажу та експлуатації для Конвертер мультимедіа Baumer Hubner Berlin HMG 11. Baumer Hubner Berlin HMG 11 40 сторінок. Absolute encoder ethercat
Також для Baumer Hubner Berlin HMG 11: Посібник з монтажу та експлуатації (48 сторінок), Посібник з монтажу та експлуатації (40 сторінок), Інструкція з монтажу та експлуатації (36 сторінок)

SAFETy AND ATTENTION INSTRUCTIONS

2.2

Attention instructions for mounting and operation

)

Risk of destruction due to electrostatic charge

Electronic parts contained in the device are sensitive to high voltages�

» Do not touch plug contacts or electronic components�

» Protect output terminals against external voltages�

» Do not exceed maximum voltage supply�

)

Risk of destruction due to mechanical overload

Rigid mounting may give rise to constraining forces�

» Never restrict the freedom of movement of the device� The mounting instructions

must be followed�

» It is essential that the specified clearances and/or angles are observed.

)

Risk of destruction due to mechanical shock

Violent shocks, e� g� due to hammer impacts, can lead to the destruction of the

sensing system�

» Never use force� Mounting is simple when correct procedure is followed�

» Use suitable puller for dismounting�

)

Risk of destruction due to contamination

Dirt penetrating inside the device can cause short circuits and damage the sensing

system�

» Absolute cleanliness must be maintained when carrying out any work on the

device�

» Never allow lubricants to penetrate the device�

)

Risk of destruction due to adhesive fluids

Adhesive fluids can damage the sensing system and the ball bearings. Dismounting

a device, secured to a shaft by adhesive may lead to the destruction of the device�

» Do not use adhesive fluids for fixing.

4/35

MB244EN - 11171691, 19A2, Baumer_HMG10-SSI_II_EN