Baumer Hubner Berlin microGen PMG10 Profibus DP Посібник з експлуатації - Сторінка 19
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Конвертер мультимедіа Baumer Hubner Berlin microGen PMG10 Profibus DP. Baumer Hubner Berlin microGen PMG10 Profibus DP 40 сторінок. Absolute encoder
Друкувати сторінкуBaumer Hübner
6
Electrical installation
DANGER
Injury by to secondary damage
Encoder failure or incorrect signals may entail system control errors.
a) Eliminate secondary encoder damage by the relevant safety precautions in the downstream
electronics.
NOTICE
Sensor damage due to faulty power supply.
The sensor can be damaged due to faulty power supply.
a) Operate the sensor only with protected low voltage and safe electrical isolation of protection
class III.
NOTICE
Sensor damage or unintended operation due to work on live parts.
Work on live parts may lead to unintentional operation.
a) Disconnect the power before carrying out any cable.
b) Disconnect the power before connecting or disconnecting electrical connections.
NOTICE
Sensor damage by excessive switching voltage.
The sensor's overload limit is for protection only and not intended as limit for the permanently
switching voltage.
a) Make sure that the maximum permitted switching voltage is not exceeded.
V1 | PMG10 & PMG10P Profibus DP
Operating Manual
Electrical installation
|
6
19