Baumer X 700 Посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник для Конвертер мультимедіа Baumer X 700. Baumer X 700 26 сторінок. Absolute encoder profibus-dpv0 (with bus cover and ssi coupler)
Також для Baumer X 700: Посібник (41 сторінок)

Друкувати сторінку

Disclaimer of liability

The present manual was compiled with utmost care, errors and omissions reserved. For this reason

Baumer IVO GmbH & Co. KG rejects any liability for the information compiled in the present manual.

Baumer IVO nor the author will accept any liability for direct or indirect damages resulting from the use of the

present information.

At any time we should be pleased receiving your comments and proposals for further improvement of the

present document.

Created by:

Baumer IVO GmbH & Co. KG

Villingen-Schwenningen, Germany

Registered trademarks

SIEMENS

, SIMATIC

, Step7

und S7

are registered trademarks of Siemens AG. PROFIBUS, the

PROFIBUS Logo and PROFIdrive are registered trademarks of the PROFIBUS user organization respectively

of PROFIBUS International (PI).These and other names applied in the present manual that at the same time

are registered trademarks are not correspondingly marked. Having omitted the respective marking does not

necessarily imply that the names are not registered trademarks or that there are no existing patents and

protected patented designs.

1. Introduction

1.1. Scope of delivery

Please check the delivery upon completeness prior to commissioning.

Depending on encoder configuration and part number delivery is including:

 Basic encoder

 Profibus bus cover

 Sealing bolt for any unused cable gland

 Describing file and manual (available as download on our website)

Baumer_ProfibusDPV0_BIDE_MA_EN.docx

3/26

Baumer IVO GmbH & Co. KG

11.19

Villingen-Schwenningen, Germany