Baumer SXC21c Посібник користувача - Сторінка 37

Переглянути онлайн або завантажити pdf Посібник користувача для Цифрова камера Baumer SXC21c. Baumer SXC21c 48 сторінок. Sxc series cameralink cameras with truesense imaging sensors
Також для Baumer SXC21c: Посібник із швидкого старту (2 сторінок)

Друкувати сторінку

User Sets

8.6.

Three user sets (1-3) are available for the Baumer cameras of the SXC series. The user

sets can contain the following information:

Parameter

Binning Mode

CameraLink

Control

Defectpixellist

Digital I/O Settings

Exposure Time

Gain Factor

Look-Up-Table

These user sets are stored within the camera and and cannot be saved outside the de-

vice.

By employing a so-called "user set default selector", one of the three possible user sets

can be selected as default, which means, the camera starts up with these adjusted pa-

rameters.

8.7.

Factory Settings

The factory settings are stored in an additional parametrization set which is used by de-

fault. This settings are not editable.

Parameter

Mirroring Control

Offset

Partial Scan

Pixelformat

Readout Mode

Testpattern

Trigger Settings