Baumer NE134 Інструкція з експлуатації Посібник з експлуатації - Сторінка 34
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Касовий апарат Baumer NE134. Baumer NE134 44 сторінки. Electronic preset counter
Друкувати сторінкуNE134
Enter code Enter code via the keys
Wrong Code If a wrong code has been entered, „Error" is displayed as long as
Correct code unknow If the correct code is not known, please return the counter to the
Select programming lines Select the programming line needed via the keys
Modify operation Select the decade to be changed via the keys
parameters The selected decade blinks.
Leave programming It is possible to shut down the programming at any time by pushing
Reset to factory setting Turn on instrument and press the keys
34
5
Programming mode
Operation parameters are set on the programming mode. The pro-
gramming mode consists of 3 programming fields. Access is pro-
tected by a 4-digit code or via a control input.
Programming field 1
Here it is possible to select and modify all operation parameters. The
operation parameters that are disabled for the operator are also dis-
played.
Programming field 2
The individual operation parameters for operator access are disabled
or enabled here.
Programming field 3
All functions and values as well as interface parameters conditioned
by the machinery are programmed here.
Switch on programming
➜ Press key
and
„Code" appears on the lower display.
No code number has yet been set at the factory, therefore it is pos-
sible to skip the code query by pushing
gramming line 50. After a code has been set, it will only be possible
to switch to the programming mode by entering the correct code.
Press key
to confirm.
The instrument switches from the operator to the programming level.
remains pushed. After 15 s the instrument switches automatical-
ly back to the operator level.
supplier or effect reset to factory setting.
This function can also be reached by pushing
The line number is displayed.
Enter the value by pushing the keys
Press key
.
and
simultaneously.
All values already programmed are set back to the factory setting.
„ClrPro" briefly appears on the display.
www.baumer.com
simultaneously.
. The code is set on pro-
.
.
and
.
.
.
simultaneously.