Baumer DSRC BT Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу для Промислове обладнання Baumer DSRC BT. Baumer DSRC BT 6 сторінок. Strain ring

Electrical connections (DSRC ST / DSRC QM)

Bridge circuit

Wiring diagram

Electrical connections (DSRC BT / DSRC AX)

Bridge circuit

Wiring diagram

V1.1

11/12

Pin assignment (per ring half)

n.c.

Amplifier

Pin assignment (per ring half)

brown DMS

white

DMS

Amplifier

28.02.08

6 Maintenance

Small scratches in the foil won't cause problems. When there are cracks in the foil moisture will

penetrate the strain gages and the measurement can be affected.

We generally recommend an annual maintenance at Baumer Sensopress when the strain rings are

frequently used. The strain gages and the steel foils will be replaced and a new certificate of

compliance will be issued.

Possible ways to find out when strain rings should be maintained?

Install all strain rings on one tie bar and compare the operational strain. If one strain ring

shows a big difference, you can be sure of that this ring should be maintained.

If measurement abnormalities occur, please return the ring for maintenance.

Visual control for cracks in the foil and other mechanical damages.

Maintenance examples:

The foil has been misaligned due to false installation

/ manipulation.

V1.1

12/12

Mechanical damage of the cable connection. Moving

platens or tools have crashed into the ring.

28.02.08