Comat SMS Relay Інструкція з експлуатації Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Пульт дистанційного керування Comat SMS Relay. Comat SMS Relay 17 сторінок. Message system
Друкувати сторінкуComat SMS Relay
3.
Installation details/ scope of supply
The SMS Relay comes together with the CMS-ANT small device antenna. The place of
installation must be taken into account for the antenna selection.
PLEASE NOTE:
The CMS-ANT small device antenna is not suitable for
installation in a switch cabinet (shielding).
Here the CMS-ANT-MAG/2.5M antenna with magnetic feet or the CMS-ANT-SPEZ/5M
external signal antenna provide a much better result. Please take this into account when
ordering. Our product specialists will be glad to answer any questions.
CMS-ANT
CMS-ANT-MAG/2.5M
CMS-ANT-SPEZ/5M
When connecting to the 230VAC mains it is absolutely necessary to ensure that the power
supply and the inputs power supply originate from the same phase i.e. a voltage above
240VAC must not arise on the device. The SMS relay must be connected according to the
following schematic:
Connection CMS-10/AC110-240V
Connection CMS-10/DC12-48V
The regulations and common standards are to be followed for the electrical installation and
the installation must be carried out by a competent person.
Operating instructions SMS Relay
ba_smsrelay_0706e.doc
5