Dover Triton 9640 Процедура конвертації - Сторінка 10

Переглянути онлайн або завантажити pdf Процедура конвертації для Промислове обладнання Dover Triton 9640. Dover Triton 9640 10 сторінок.

8. Lift the dispenser slightly and slide the bottom rear

edge of the unit under the two tabs on the slide tray.

Slide bottom rear edge of dispensing

mechanism under tabs on slide tray.

Lower the front of the dispenser, making sure the

cutouts in the left and right chassis extensions hook

the two threaded bolts that are built in to the top front

of the slide tray. The dispenser should lay flush with

the surface of the slide tray.

Hook chassis cutouts on slide tray bolts

Place the two included wing nuts on the threaded

bolts and secure the dispenser to the slide tray.

Secure left and right corners of

dispenser to slide tray using included

wing nuts.

RITON

YSTEMS

9640-

-9600

ONVERSION

ROCEDURE

9. Slide the dispenser into the cabinet while viewing the

dispenser cables. Ensure the cables don't catch on

anything.

10. Load the currency cassette, prime it and then install

it into the dispensing mechanism. Refer to the 9600

Operations Manual (07103-00032) for instructions

on loading the cassette!

11. After installing the cassette, push the slide tray into

the cabinet and close the security cabinet door.

Check that the dispenser currency exit and the bill

tray opening align. Close and lock the security

cabinet.

12. Plug the ATM main power cord back into the wall

outlet and turn the power on at the service panel, if

needed. Turn the ATM power switch to ON (I).

Refer to the 9600 Operations Manual for additional

information regarding the software setup of the unit.

For additional help, contact the Triton Technical

Service Department.