Amphenol Telect nrg600BT08-M Посібник з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з монтажу для Автоматичні вимикачі Amphenol Telect nrg600BT08-M. Amphenol Telect nrg600BT08-M 20 сторінок. 600a load center with nrgsmart remote monitoring
Друкувати сторінку
Overview
The Amphenol Network Solutions nrg600BT08-M 600A dual-feed 8/8 circuit breaker/TFD Load Center with 5 GMTs features -48V
operating voltage to fit in legacy and "next-gen" network applications, with advanced circuit level monitoring features engineered into a
4RU footprint. Each of the dual feeds contains eight positions for either bullet-style breakers or TFD fuse holders. Each of the dual feeds
also includes five GMT fuses, providing ample capacity for distribution to a broad range of components.
The panel provides total front access to fuses and LED status. Below the status LED console is a pull-out designation card holder.
All terminals for inputs, outputs, ground and alarms are on the rear of the panel. All terminals are covered by a single full-width
transparent terminal cover:
Inputs are studs for dual-hole lugs.
•
Ground terminals are dual, threaded holes for ground bolts.
•
Output studs for dual-hole lugs and screw posts for GMTs.
•
Power/fuse alarm terminals are wire wrap pins.
•
The bullet terminals can accept either TFD fuse holders or bullet terminal breakers. Single pole, double pole and triple pole breakers
are
also supported.
The GMT fuse holders are mounted inverted so that the GMT indicator flag flips downward when tripped, making identification and
detection easier, especially on taller racks. In addition, the GMT fuse holders/ sensors are generously spaced for easy grip of fuses
and better heat dissipation.
A Feed Bullet
Terminal Sensors
nrg600BT08-M
Figure 1: nrg600BT08-M Front View
A Feed GMT
Alarm Card
Sensors
Designation Card
B Feed GMT
Sensors
3
All rights reserved. 12.05.19 145121-2 A0
B Feed Bullet
Terminal Sensors
Amphenol Network Solutions
509.926.6000 – amphenol-ns.com