Amphony H1000 Посібник з експлуатації та встановлення - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з експлуатації та встановлення для Навушники Amphony H1000. Amphony H1000 8 сторінок. 2.4 ghz digital wireless headphones
Також для Amphony H1000: Порівняння характеристик (1 сторінок), Інформація про продукт (4 сторінок), Поширені запитання (4 сторінок)
Друкувати сторінку
User and Installation Guide
Problems and Solutions Table
What Is
Happening
Transmit light of
transmitter does
not light when
DC power is
applied
Transmit light
goes out after 5
seconds and
does not light
again
No audio at
headphones
Audio is
distorted
Audio at
headphones
drops out
intermittently
For more information, including a detailed troubleshooting guide,
visit the Amphony web site at: www.amphony.com
Possible Why
Faulty AC adapter
or faulty power outlet
No audio present at
audio input
Transmitter hung up
Batteries empty or
plus contact of
batteries deformed
Volume control at
minimum
Receiver hung up
Audio level too high
Strong interference
Batteries empty
Unstable power
supply
What to Do
Check the power outlet and the
AC adapter, if possible, check for
correct voltage of the adapter.
Check the audio connection to
the transmitter and ensure that
there is audio present.
Disconnect and then reconnect
DC power.
Check battery voltage, also
check that plus contact of both
batteries touch plus contact of
battery compartment,
replace batteries if necessary
Slowly increase volume at the
headphones
Switch headphone power off and
on
Ensure that the audio level
provided by the audio device
conforms to the line output level.
If possible, lower the audio level.
In some cases, there may be
strong interference preventing
proper transmission of the audio
signal, such as microwave ovens,
directional data or video trans-
mission devices etc. Try to either
eliminate the interference,
relocate the transmitter, or use
RangeBooster transmitters to
improve reception.
Check the batteries and replace
them if necessary.
Make sure that the power outlet
delivers a stable voltage. Very
strong surges or voltage
fluctuations may cause audio
dropouts. Try using a surge
protector.
R
Page 5