Combi Flex Інструкція з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Коляска Combi Flex. Combi Flex 13 сторінок.

Attaching the Combi Connection Infant Seat

ATTACHING THE COMBI CONNECTION AND ATTACHMENTS

1. Pull the carrier attachment straps from behind the seat cushion.

2. After removing the Kid's Tray attach the Combi Connection

attachments by slipping them over the armrest pins until you

hear the plastic tabs click into position. Gently pull up on

attachment, to be sure it is secure.

3. Attach Kid's Tray. Pull up on the tray

to ensure it is secure.

4. Recline the backrest to the middle position or lower.

5. Attach Combi Connection infant seat to attachments and press

down until seat locks in place. Infant car seat MUST be secured

to stroller. After installtion, lift car seat to verify it is securely

locked onto stroller.

6. Bring the carrier attachment straps through the belt guides

located on each side of the infant seat/carrier and fasten the

buckle. (If the strap is the incorrect length, adjust as needed. To

adjust, thread fabric through each side of the buckle.)

WARNING:

ENTRAPMENT, ALWAYS remove carrier

attachments when you are not using the Combi

Connection Infant Carrier.

Detaching the Combi Connection

1. Locate the release lever and pull upward to

unlock both sides of the infant seat.

TO AVOID FINGER

- 8 -