Ampler Stellar Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Скутер Ampler Stellar. Ampler Stellar 17 сторінок. 2017
Також для Ampler Stellar: Посібник користувача (16 сторінок)
Друкувати сторінку5
Insert the pedals
6 mm
Mount the reflectors
V2.0 04.06.20
Montage
1. Unwrap the pedals. The pedals are marked with R (right) or L (left).
The R pedal goes on the chainwheel side and the L pedal goes on
the non-chainwheel side.
2. Tighten the pedals with the 6 mm hex key Pedals need to be tight
so make sure you put some
Pedals need to be tight so make sure you put some force into it.
Expect resistance only at the end of the thread, if the pedal is hard to
thread in from the beginning then the threads must be inspected.
links
rechts
L
R
1. Clamp the white front reflector below the front light.
2. Attach the red rear reflector to the bracket. Wrap the bracket
around the seat post and secure it with the screw.
3. Attach one orange reflector on the front wheel, one on the rear
wheel. Pick a spoke, place the reflector on the spoke and push the
clasp at the reflector mount. Fasten it with a screwdriver.