Combi-Camp Valley Інструкція - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція для Намет Combi-Camp Valley. Combi-Camp Valley 18 сторінок.

ACCE SSO RIES TO T HE

TR A I LER T ENT

Fitting the annex:

• The detachable side of the trailer's

body canvas is zipped out.

• The annex cabin is zipped in.

• The poles with accompanying two

round corners are put into the

sleeve inside the annex.

• The support poles with hook end

are put into the two holes in the

trailer's steel section at the floor.

• The two support poles with clamps

are placed in the corners of the

floor to fix the main tent.

• The PVC floor of the annex is then

stretched and pegged all the way

round, do not tighten too much.

• Finally place the fibre glass pole inside

the ventilation flap, where after the

inner tent is fitted.

The door canopy is fitted as follows:

• The door canopy is zipped together

and the poles are fitted with guy

ropes.

Extra sun canopy is fitted as

shown:

• The sun canopy has 3 brass eyelets in

each end. The one fits the awning fra-

mes spigots and is then attached to

the guy rope on each side. The 3 legs

are fitted and pegged with the guy

rope.