Dowco Hydration Bladder Інструкція з догляду та використання - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з догляду та використання для Аксесуари для мотоциклів Dowco Hydration Bladder. Dowco Hydration Bladder 2 сторінки.
Друкувати сторінкуe. Thread the tubing through the large access port located at the top of the lid. (Figs. 3 & 4)
f. Reconnect the tube and mouthpiece to the bladder.
g. Place the bladder into the lid and zip the lid compartment closed. (Fig. 5)
4. CARE AND CLEANING: (Remove from motorcycle)
a. To clean the inner bladder, simply fill with fresh warm water, shake vigorously, and drain.
b. To eliminate odors from the inner bladder, fill with fresh water and add a tablespoon of baking soda.
Let sit overnight and then drain and rinse with warm water.
c. To sanitize the inner bladder, fill with warm water and add two teaspoons of bleach. Let sit overnight
and then drain and rinse thoroughly with warm water.
d. When not using the hydration system, remove the inner bladder and drain all remaining liquid.
Leave large fill cap open and hang the bladder upside-down if possible to allow moisture to evapo-
rate out.
5. CUSTOMER SERVICE:
For further information contact Dowco inc. at
DOWCO Inc.
4230 Clipper Dr.
Manitowoc, WI 54220 USA
Phone: 1-800-558-7755
Fax: 920-682-5891
email: [email protected]
DOWCO, Inc.
4230 Clipper Drive
Manitowoc, WI 54220
CAUTION
!
Check for leaks before every use.
Fax: 920-682-5891
Phone: 1-800-558-7755
Website: www.dowcopowersports.com
Fig. 5
Item # 01074
12/5/06
Page 2
Printed in China