Caraudio-Systems z.LiNK ZL-MYGIG Посібник - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник для Обладнання для запису Caraudio-Systems z.LiNK ZL-MYGIG. Caraudio-Systems z.LiNK ZL-MYGIG 9 сторінок. Audio-video-input incl. video-in-motion compatible with chrysler, dodge and jeep vehicles with mygig navigation systems
Друкувати сторінку
Instruction for example Chrysler C300
Remove the front panel from the centre console, which is
attached to multiple clips.
Remove the 4 TORX screws and pull the device out of the
centre console.
Remove the grey female 22pin connector from the rear of
the device and connect it to harness TV-MYGIG. Connect the
grey female 22pin connector of harness TV-MYGIG to
the device.
Connect the AV-input and the AV-output to the white female
22pin connector according the pin assignment and connect the
Female RCA to the av-sources.
Note: Use the attached white female 22pin connector if the male 22pin connector of the
head-unit isn't occupied by a white female 22pin connector.
If the male 22pin connector of the head-unit is occupied by a white female 22pin connector
connect the pins into the white female 22pin connector of the vehicle (the attached white
female connector will not be required.
There are 2 options if the pins are occupied by factory:
1. Factory-RSE is installed. This interface will not be needed (separate video-in-motion
TF-MYGIG optionally available).
2. Factory RSE isn't installed. The pins are prepared by factory and can be removed.
Version 09.01.2014
ZL-MYGIG