Downee Keystone DPG300 Інструкція з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Відкривач воріт Downee Keystone DPG300. Downee Keystone DPG300 4 сторінки. Gravity latch no-drill
Друкувати сторінкуTrim both Spindles using the trim
marks.
POST (mm)
TRIM MARK
50
6
75
4
90
3
100
2
125
no trim
TIP: Use a hacksaw to avoid
bending the Spindle.
Maintenance
• Inspect Latch annually or more frequently if the gate is used often.
• Only lubricate with powdered graphite lubricant. No petroleum-based lubricants, oils etc.
• Keep Latch free of contaminants
7mm
13mm
Mark the Latch position on Fence Post.
Drill 2mm Ø pilot holes, and secure with
supplied countersunk screws.
Position Button Body with Spindle in the
slot on Latch Body. Mark mount holes, drill
2mm Ø pilot holes then secure.
Close gate and place Striker Rod in Latch
and mark the Rod's centre on gate. Drill
pilot holes and mount.
Test lock and unlock from both sides.
Button
Body
6
5
4
3
2