Caraudio-Systems V5-NTG45-PNP Посібник - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник для Автомобільний приймач Caraudio-Systems V5-NTG45-PNP. Caraudio-Systems V5-NTG45-PNP 17 сторінок. Compatible with mercedes benz vehicles with comand online ntg4.5 navigation and audio20 ntg45 system with 4pin hsd lvds connector
Друкувати сторінку
3.2.2. After-market rear-view camera
3.2.2.1.
Connection to the after-market rear-view camera
V5C-MBN45
harness
1
Connect the video RCA of the after-market rear-view camera to the female RCA
connector "REAR CAM" of the interface box V5C-M613.
2
-
The green wire of harness V5C-UNI01 can be used
for +12V electric power supply (max. 1A) of the
after-market rear-view camera. Configure in the
OSD-menu "MISC", menu item "POWER OUT 2" the
designated electric power supply (see chapter
"Configurable switching outputs").
-
3
-
On some vehicles the reverse light signal doesn't exist on the CAN-bus. Connect the
white wire of harness V5C-UNI01 to reverse light signal (+12V of reverse light) if the
system doesn't switch to the rear-view camera automatically after the described
OSD-setup (see next chapter).
Version 03.06.2015
Interface-box
V5C-M613
FRONT
V5C-UNI01
harness
Power Out 2 (max. 1A)
+12V reverse gear analogue (exception)
1
Rear-view
2
camera
3
V5-NTG45-PNP