Follett Maestro Plus MCD425WHS Інструкція з монтажу Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Льодогенератор Follett Maestro Plus MCD425WHS. Follett Maestro Plus MCD425WHS 16 сторінок. With ride technology
Друкувати сторінку
5.
External Connections
5.1
Air-cooled ice machines only
➊
§ Install drain line
(3/4" MPT).
The rigid drain line from the ice machine must have
Front View - Air Cooled
at least 1/4" per foot (6,4 mm/0,3 m) pitch.
§ Install ice machine potable water supply
.
(3/8" FPT)
Note: Follett recommends a Follett water filter
system be installed in the ice machine inlet
water line (standard capacity #00130299, high
capacity #00978957, carbonless high capacity
#01050442).
5.3
Bin Stat Cable
➌
IN from
dispenser
Front View - Water Cooled
RELAY
OUT to
ice machine
§ Route 2-pin bin stat cable from Vision dispenser
Vision • RIDE Technology
➋
➊
➋
CONDENSER
OUTLET
➋
➍
➊
➊
➊
Front View - Air Cooled
5.2
Water-cooled ice machines only
➌
§ Install drain line
Front View - Water Cooled
The rigid drain line from the ice machine must
have at least 1/" per foot (6,4 mm/0,3 m) pitch.
§ Install ice machine potable water supply
(3/8" FPT) .
Note: Follett recommends a Follett water filter
system be installed in the ice machine inlet
water line (standard capacity #00130299,
high capacity #00978957, carbonless high
capacity #01050442).
§ Connect cooling water supply
(3/8" FPT).
ICE MACHINE
Note: Do not apply
power to ice
machine bin signal
connection! Ice
machine can only
see contact closure.
and connect at front of ice machine
Maestro Plus
CONDENSER
OUTLET
➋
➍
➊
➊
(3/4" MPT).
➋
➌
and return
➋
➋
.
➍
11