Amplitec C10G-CP Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач Amplitec C10G-CP. Amplitec C10G-CP 13 сторінок. Wide band mini booster
Друкувати сторінкуTroubleshooting
1.The AC/DC Power Adapter LED is OFF
Cause
Power cable of the power adapter unit has
not been connected or faulty
2. The AC/DC Power Adapter LED is ON( Green ) but no signal transmits
Cause
Signal cable from outdoor antenna has not
been connected
Coaxial cable is connected but cable is
damage or connector is broken
3. Output power is not enough (Green )
Cause
Input signal is too weak and unstable.
(The Alarm LED is green)
4. Output power is full ( Orange )
Cause
The Boosters is working in linearity
(The Alarm LED is Orange )
5.Signal Oscillation ( Red )
Cause
Over accepting of donor antenna or
strong interference
( The Alarm LED is red )
The isolation between donor antenna and
service antenna is not enough
( The Alarm LED is red )
Specification
Items
Frequency Range
This is the best working condition for the
Booster, do not need to take any action.
Cellular
824 ~ 849 MHz
PCS
1850~ 1910 MHz
10 / 13
Amplify your world
Action
Check connection of adapter system
Action
Check all connections
Make sure there is no sharp bends or
breaks in the cable. and check the
connectors to see whether they are fixed
firmly or not
Action
Adjust the donor antenna's position and
direction, make sure the input signal is
moderate.
Action
Action
Adjust the donor antenna's position and
direction , make sure the input signal is
moderate.
Increase the distance between the two
antennas, make sure the isolation more
than 80dB
Uplink
Downlink
869 ~ 894 MHz
1930~ 1990 MHz