Amplitec C20L-LTE28B Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач Amplitec C20L-LTE28B. Amplitec C20L-LTE28B 13 сторінок.

3) Put the expansion pipes(size: 8mm) into the 4 drilled holes.

4) As shown in the figure, align the fixing holes of the U-shaped back holder with corresponding holes

on the wall, and drive 4 M6*40 screws into the expand plugs with screwdriver and fasten the repeater

firmly.

Antenna Connections

Select suitable outdoor antenna and indoor antenna, according to the characteristic of the coverage

area. Installation and connection of outdoor antenna and indoor antenna should follow the requirements

as following:

1）The outdoor antenna should be installed at the place with the strongest signal and towards

BTS.

2）The length of cable, which connect the outdoor antenna and the booster, should less than be 20

meters.

3）Wrap the waterproof tape around the connection between outdoor antenna and outdoor cable.

4）The indoor antenna should be 5m away from the outdoor antenna in height, and can't towards

outdoor antenna.

5）It will be better if there can be a wall between outdoor and indoor antenna.

6）Outdoor antenna should connect to BTS port of the signal booster and indoor antenna to the

MS port