AmpliVox B9151 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери AmpliVox B9151. AmpliVox B9151 13 сторінок.

Друкувати сторінку

diGital player / recorder S1960 (optional eQuipment)

Built-in 128MB NAND flash memory equipped for 120 min.

recording time.

SD card slot- supports industry standard SD cards up to 2GB,

providing up to 32 hours record time per card.

caSSette player / recorder S1950 (optional eQuipment)

power: Press the power function to turn the power on to the

Cassette Deck. Once the power is on, a small red light to the right of

the POWER function will turn on, and the Counter display below the

POWER function will light up. Press the POWER function again to turn

the power off to the Cassette Deck.

TApE COuNTEr: This 3 digit illuminated display serves as a numeric

reference for the user as an indicator of where on the cassette tape

material is being recorded or played back. Please refer to the section

below entitled 'RESET' for further information on this function

mOdE: The cassette player has three operating modes- CONTINUOUS

LOOP (plays side A then side B over and over until stopped), AUTO

REVERSE (plays side A, then side B and stops), NORMAL (plays side A

then stops).

rECOrd:

Press the RECORD function to record any of the microphones, CD

decks, or any other sources being reproduced by the SW905, including

the CD Deck. Recording will start instantly.

rEWiNd: The REWIND function rewinds the tape back to the

beginning of the tape and stops automatically once the beginning of

the tape is reached. Press the STOP button on the Tape Player at any

time during the REWIND function to manually stop REWIND.

pLAY (r. pLAY ANd F. pLAY): Cassette tapes offer two sides for

storing material on. As a convenience the CASSETTE DECK offers

the ability to play back both sides of the cassette without the need

to manually remove it and turn it over. Press the F. PLAY function to

play back the side of the cassette tape facing up; press the R. PLAY

function to play back the side of the tape facing down.

sw915 digital audio travel partner

USB port connects to PC, which sees it as an external storage

device (no special driver required); or other USB - capable device for

easy download or duplication.

Up to 99 recording tracks.

Play MP3 & WAV format files.

Digitally record in MP3 compression format, high sample rate at

44.1 KHz, 128 Kbps.

USB plug type: USB 1.1

Impedance: 10K ohms

Output level: 0.9V +/- 2dB (1KHz/0dB)

Operating system: Windows 98, 2000, XP

FAST FOrWArd: The FAST FORWARD function winds the tape

forward and is stopped automatically once the end of the tape is

reached. Press the STOP button on the Tape Player at any time during

the FAST FORWARD function to manually stop FAST FORWARD.

pAuSE: The PAUSE function puts the tape on hold without

disengaging the RECORD function, or the F. PLAY or R. PLAY functions,

allowing the user to temporarily stop the tape during recording or

playback. Press the PAUSE function to temporarily stop the cassette

tape; press the PAUSE function again to start up the cassette tape at

the exact point it was paused at.

STOp/Ej (STOp/EjECT) The STOP/EJ function serves two functions.

Press the STOP/EJ function once to stop the cassette tape from

playing, rewinding or fast forwarding. When the cassette tape is

stopped, press the STOP/EJ function to eject the cassette tape from

the Cassette Deck.

rESET: Press the RESET function to reset the number in the

COUNTER display to "000". This function can used at any point during

recording or playback, and is useful for creating a reference point.

dirECTiON/pLAY iNdiCATOrS: There are two arrow heads that

indicate which side of the cassette tape is active, or playing or being

recorded on. The arrowhead aiming to the left indicates that the side

of the tape facing down is active; the arrowhead aiming to the right

indicates that the side facing up is active.

LEvEL: This controls the volume of the Cassette Deck, and allows

for adjusting the volume independently of microphones plugged into

Channel 3. Please see the section entitled 'INPUTS AND OUTPUTS' for

further information on Channel 3 volume control.

piTCh: The PITCH tuning control allows you to change the playback

speed to alter the pitch of the sound. Turning the control clockwise will

increase tape speed and counter clockwise will decrease tape speed.

Normal position for this control is at center detent.

NEEd hELp?

CALL 800-267-5486

Or 847-498-9000

EmAiL:

CuSTOmErSErviCE@

AmpLi.COm