Doyson S 100 BT Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Блок управління Doyson S 100 BT. Doyson S 100 BT 2 сторінки. Control module with bluetooth
Друкувати сторінкуS 100 BT USER MANUAL
HOW TO SWITCH ON AND OFF THE CONTROL MODULE
Press the control module on/off key. The display will light up and
either the radio station number or the time will be shown on
it. Press again the on/off key to switch the control module off.
GENERAL SYSTEM ON/OFF
Pressing simultaneously the on/off and > keys all the control
modules of the multiroom system will switch on while a flashing
"ON" will be shown on the display.
Pressing simultaneously the on/off and < keys all the control
modules of the multiroom system will switch off while a flashing
"OFF" will be shown on the display.
VOLUME CONTROL
While the control module is on press the > key to turn the
volume up and the < key to turn the volume down.
CONTROL OF BALANCE AND MONO/STEREO SOUND
While the control module is on, press repeatedly the MOD key
until the feature you want to adjust is shown on the display. Then
use the keys < and > to regulate the function.
TIME SETUP
Either when the control module is on or off, press repeatedly
the MOD key until the function "SET" is shown on the display.
Set the time using the < > keys. Once the time is set in one
module, the rest of control modules will automatically be
sincronized.
AUTO OFF SETUP
While the control module is on, press repeatedly the MOD key
until the "AUTO OFF" function is shown on the display. The time
countdown for automatic desconexion will set by pressing the
on/off key repeatedly (time will increase in intervals of 15 minutes)
or using the < > keys (time will increase in intervals of 1 minute).
AUTO ON SETUP
While the control module is off, keep pressed the on/off key
until the "AUTO ON" function is shown on the display. The time
countdown for automatic conexion will set by pressing the on/off
key repeatedly (time will increase in intervals of 15 minutes) or
using the < > keys (time will increase in intervals of 1 minute).
SLEEP MODE
While the control module is on, press repeatedly the MOD key until
the function "SLEEP" is shown on the display. The switch off time can
be set by pressing the on/off key repeatedly (time will increase in intervals
of 15 minutes) or using the < > keys (time will increase in intervals of
1 minute).
Another way to activate this function is by keeping pressed the on/off
key during 3 seconds while the control module is on. When the "SLEEP"
mode is shown on the display, the switch off time can be set by pressing
the on/off key repeatedly (time will increase in intervals of 15 minutes)
or using the < > keys (time will increase in intervals of 1 minute).
ALARM CLOCK SETUP
Either when the control module is on or off, press repeatedly the MOD
key until the "ALARM" function is shown on the display. Using the < >
keys the alarm time can be set. Immediately after the alarm mode (FM,
CH, IN or BEEP) can be chosen by pressing the lower key on the right
hand side. The alarm clock volume can be also preset using the < > keys.
A small bell symbol on the display will show the alarm clock is on.
To switch off the alarm clock when ringing just press any key.
To deactivate the alarm clock function press repeatedly the MOD key
until the "ALARM" function is shown on the display. Immediately after
press repeatedly the lower key on the right hand side until "ALARM
OFF" is shown on the display. The bell symbol will not appear yet on
the display.
The control module memorizes the last alarm clock setting if no new
features are introduced.
MICROPHONE FUNCTIONS
General calls: While the control module is on, press shortly the MIC
key. Immediately after "CALL" will be shown on the display, speak and
press again the MIC key to hang up. The rest of control modules will
show on their displays the zone number that is calling during the incoming
call.
Zone calls: While the control module is on, keep pressed during 2
seconds the MIC key. Immediately after "CALL 1, 2..." will be shown
on the display. Use the < > keys to chose the zone to call. Then press
the MIC key to start talking. Press again the MIC key to hang up.
Baby-phone: While the control module is off, press the MIC key. "BABY
ROOM" will appear on the display. Activate or deactivate this function
using the < > keys. Once the first baby room is activated the control
module in the listening area must be also activated. With the listening
control module off, press twice the MIC key. "PARENT" will show on
the display. Then use the < > keys to activate or deactivate the listening
function.
Up to 5 baby rooms and 5 listening areas can be selected to be working
simultaneously.
DO NOT DISTURB MODE
Either when the control module is on or off, press repeatedly the MOD
key until "DONT DISTURB:OFF" is shown on the display. Press the >
key to activate the "do not disturb" function. "DONT DISTURB:ON"
will be shown on the display. From that moment the control module
will not receive any call.
To deactivate this function, repeat the operation and press the key <.
"DONT DISTURB:OFF" will be show on the display and from that
moment the "do not disturb" mode will be deactivated.
AUXILIARY AUDIO INPUT (IN)
Connect the audio player jack in the audio socket. Press the auxiliary
audio input key until "IN" is shown on the display.
BLUETOOTH CONNECTION:
With the control module turned on, press the key
symbol until the BLUETOOTH function
with the
appears moving along the screen. Then keep this key
pressed for two seconds so that the BLUETOOTH
function goes into visible mode. BTDISCOVER will
appear on the screen.
From that moment you have one minute to search
your device "DOYSON-xxxxxx", select it to pair it
and enter the code 0000. The module will show on
the screen BT: ON to indicate that it is linked. When
sending music from your device, PLAY will be displayed
on the screen.
For future occasions you only need to connect from
your mobile device with the desired area, even when
the control module is turned off.