DP CKRS Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Водяний насос DP CKRS. DP CKRS 4 сторінки. Inline circulating pump

Dear Client,

Congratulations on your purchase of a quality pump from the

Davies range of pumping products. Like all Davies products,

the quality and reliability is first and foremost, carefully chosen

from manufactures worldwide to carry this proven brand name

and deliver years of service. Please check your pump for any

physical damage during transit and advise your supplier if

so. Check the name plate to make sure the pump is what you

ordered. The longevity of your pump largely depends on its

application of use and the environment it is working in. Make

sure it is the correct type of pump for the application and it has

been sized correctly to meet your required duties

The Davies Pumps CKRS Inline circulating

pump has been designed to pump warm

liquids without suspended abrasives that

can damage the wet rotor operation.

Operation

The pump is lubricated and cooled by the

liquid being pumped. Severe damage will

be caused if the pump runs dry for over 10

seconds.

Installation

Follow the arrow on the pump body for

direction of water flow, it may be installed in

vertical or horizontal piping, but the motor

shaft must be always in horizontal position

as shown.

Operation condition

The pump is lubricated and cooled by the liquid being pumped.

It will cause severe damage when the pump runs dry for over

10 seconds.

Installation

Follow the arrow on the pump flange for direction of water flow,

it may be installed in vertical or horizontal piping, but be sure

the motor shaft must be always in horizontal position.