Comco AccuFlo AF10-E Посібник з експлуатації обладнання - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з експлуатації обладнання для Електроінструмент Comco AccuFlo AF10-E. Comco AccuFlo AF10-E 14 сторінок. Micro-abrasive blaster

Друкувати сторінку

TANK ASSEMBLY

MB2200‐10 (Standard)

MB2200‐20 (Tall)

TANK ORIFICE

MB1409‐x

1 = Lean Mixture (less abrasive)

5 = Rich Mixture (more abrasive)

Tank Orifice & Bypass Tube

BYPASS TUBE

MB2265‐x

We have configured the AccuFlo® for your

particular application.

Start with these settings.

You have the option to adjust settings. Minor

changes in powder concentration should be made

with the Abrasive Blend Control on the front panel.

For more significant changes, the abrasive

concentration in the air stream can be made

leaner (less abrasive) or richer (more abrasive) by

changing the tank orifice and bypass tube. Contact

a Comco Tech Support Specialist for information on

additional options.

• Change the tank orifice using a ¼" nut driver.

• Unscrew the bypass tube and lift it out of the

sleeve. Using the chart below, select the tube

you desire and insert it in the sleeve.

Finger tighten only do not force.

Bypass Tube Chart

Standard Tank ‐1C ‐1B ‐1A

Tall Tank ‐2C ‐2B ‐2A

TANK ORIFICE

MB1409‐

BYPASS TUBE

MB2265‐

‐18

‐25

‐30