DPA 3532-SP Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Мікрофон DPA 3532-SP. DPA 3532-SP 16 сторінок. Large diaphragm microphones
Також для DPA 3532-SP: Посібник користувача (9 сторінок)
Друкувати сторінку
T E C H N I CAL DESC R IPT I O N
The modular system
The large diaphragm microphones Types 4041-S, 4041 -T and
4 0 41-SP introduce a modular car t r i d ge and preamp l i fier system.
The Modular Microphone Cart r i d ge Type MMC4041 can be
u n s c r ewed from the Modular Microphone Preamp l i fi e rs Ty p e s
MMP4000-S, MMP4000-T and MMP4000-SP, which allows for th e
e xc h a n ge of the preamp l i fi e r.
The 3 types of 4041s are acoustically very similar, but differ in the
preamplifier technology. The Type 4041-S contains the solid-state
preamplifier Type MMP4000-S whereas the Type 4041-T has the
tube preamplifier Type MMP4000-T. The Type 4041-SP contains a
48V phantom powered solid-state preamplifier, the MMP4000-SP.
The cartridge
The Types 4041-S, 4041-SP and 4041-T are omnidirectional (pres-
sure) microphones that use the 24 mm (1 in) Modular Microphone
Cartridge Type MMC4041. The diaphragm and the cartridge housing
are both made of s tainless steel, which gives the capsule a unique
immunity against ambient temperature variations. The MMC4041
back plate is placed in a quarts insulator for maximum electrical
stability. On the 4041-S and 4041-T, the back plate is polarised wit h
200V via the HMA4000 Microphone Amplifier, giving the cartridge
an extremely high sensitivity and SPL handling capability. On the
4041-SP a polarisation generator in the pre-amp is incorporated,
providing the back plate with 200V.
The microphone cart r i d ge Type MMC4041 is designed to have a linear
on-axis response from 10 Hz to 20 kHz with a 4-6 dB soft boost aro u n d
8 kHz(see fig.3). The MMC4041 cart r i d ge module has an extremely low
self-noise of maximum 7 dB(A) and a THD less than 0.5% at 120 dB
SPL peak which means that the cart r i d ge has an imp r e s s i ve dynamic
r a n ge of 113 dB. When mounted on one of the modular high vo l ta ge
m i c rophone preamp l i fi e rs Type MMP4041-S or MMP4041 -T the micro-
phone can handle sound pressure levels up to 144 dB SPL peak before
clipping occurs. When mounted on the MMP4041-SP preamp, 134 dB
SPL peak can be handled before clipping.
2