Amprobe VPC-10 Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади Amprobe VPC-10. Amprobe VPC-10 16 сторінок. Voltage & continuity tester
Також для Amprobe VPC-10: Інструкція з експлуатації (2 сторінок)

Друкувати сторінку

This manual contains information and warnings that

must be followed for operating the tester safely and

maintaining the tester in a safe operating condition.

If the tester is used in a manner not specified by the

manufacturer, the protection provided by the tester may

be impaired. Do not use in rainfall!

The tester is protected, against the users, by double

insulation per EN61010-1 2nd Ed to CAT III 600V.

WARNING

�

To reduce the risk of fire or electric shock, do not

expose this product to rain or moisture. To avoid

electrical shock hazard, observe the proper safety

precautions when working with voltages above

60 VDC or 30 VAC rms. These voltage levels pose a

potential shock hazard to the user.

• Keep your hands / fingers behind the hand /

finger barriers of the test probes that indicate the

limits of safe access of the hand-held part during

measurement. Inspect test probes, connectors, and

probes for damaged insulation or exposed metal

before using the tester. If any defects are found,

replace them immediately.

• The voltages marked on the tester are nominal

voltages or nominal voltage ranges. The tester

shall only be used on installations with the

specified nominal voltages or nominal voltage

ranges.

• Never apply more than 600V DC or 600V AC rms.

between any terminal and earth ground.

•

indicates dangerous voltage present if the LED

turns on.

• When using the probes, do not touch the metal

probe tips.