DPA 4065 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Гарнітури DPA 4065. DPA 4065 16 сторінок. Headset microphones
Також для DPA 4065: Посібник (7 сторінок), Посібник (7 сторінок)

Друкувати сторінку

Note: If the microphone has been

exposed to water or sweat it must be

left to dry out to recover its original

specifications. Drying out the Miniature

Microphone between exposures to

humidity will also help to extend its life-

time. Leaving the microphone with the

power on will speed up the drying

process, as the built-in preamplifier will

gently heat up the microphone (idle

power ~ 2 mW).

Tip: In order to save battery power on

the belt pack transmitters while drying

out the microphones, it is a good idea

to use a P48 Phantom Power Adapter

(DAD6001).

Cleaning the microphone grid

During use in environments where the

microphone is exposed to make-up or dusty

materials, the grid may get clogged up.

Remove the microphone grid from the

microphone element and clean the grid

using a soft cloth and distilled water only.

Make sure the grid is dry before remount-

ing it on the microphone element.

Remove grid before cleaning

Cleaning the microphone cable

Residue from tape, glue or make-up on the

cable must be removed after use. Leaving

these substances on the cable over longer

periods of time may etch into the cable

jacket and will make the cable more sus-

ceptible to breaks. The cable can easily be

cleaned using organic oil (e.g. olive oil) or

lukewarm, distilled water.

Do not bend the cable or rub it harshly

since this may stress the inner cores of

the cable and cause them to break over

time.