Carbon-Ti XSC76 Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Аксесуари для велосипедів Carbon-Ti XSC76. Carbon-Ti XSC76 2 сторінки.

Друкувати сторінку
Carbon-Ti X-Spider AL7075 X-Cinch
ENGLISH
FEATURES
The X-Spider AL7075 allows a significant upgrade in replacement of the original spider or of the direct mount chainring.
The practicality of the X-Spider AL7075 is decisive in race events where a chainring, with a different size, can be replaced in few seconds only working on the four bolts,
without disassembling the crankset in the workshop. X-Spider AL7075 is available for many crankset models with standard or boost chain line.
Check the availability of the different models www.carbon-ti.com website.
COMPATIBILITY
The X-Spider AL7075 X-Cinch are compatible with Race Face Next SL G4, Next SL,
SixC, Turbine or other crankset with Cinch system interface. The X-Spider AL7075
X-Cinch simulates perfectly the chainline of the original Race Face Cinch Direct Mount
chainring. The BCD is 76 mm and requires chainrings with M8.5 mm threaded holes
(SRAM XX1 compatible).
BEFORE YOU START
It is useful to have the "Park Tool BBT-22 bottom bracket tool" or a similar BB tool
(Fig. B), necessary to loosen and tighten the threaded ring (Lockring) for the locking
of the spider. A lithium grease and medium strength threadlocker (e.g. Loctite 242) are
also requested. If you don't have any of these necessary tools, you should address
your preferred skilled mechanic.
7
INSTALLATION
Grease the waved shape of the crank arm generously, align the spider like the fig. A
and insert it so that it completely fits.
Grease the contact surface between the lockring and the spider, tighten it with the "Park Tool BBT-22
7
6
bottom bracket tool" (fig. B), applying a tightening torque of about 40 Nm.
Check the length of the chain that must eventually be shortened, eliminating some mesh, if the chain-
ring is smaller than the previous one.
Check the tightening of the lockring and the chainring fixing bolts periodically.
WARRANTY
Carbon-Ti products are guaranteed against any defects for a period of 2 years from the date of purchase by the first owner, registered by the dealer.
The warranty decays in absence of the recommended regular or extraordinary maintenance.
In case of defects, Carbon-Ti will replace or repair, at its own discretion, the recognized defective part. To be accepted, the defect must be communicated to Carbon-Ti
through the dealer/importer after his own control. If Carbon-Ti checking reveals that the damage is due to one of the reasons mentioned in the following paragraph, the
replacement will not be accepted and the defective item will be sent back to the owner at his own charge.
The guarantee does not cover damage resulting from transportation, warehousing, accidents, negligence, impact or falls, non-compliance with the information in the
instruction manuals, assembly errors and assembly using non-compatible products, bad maintenance, modifications or alterations of the product.
The guarantee does not cover parts and components subject to normal wear.
Carbon-Ti X-Spider AL7075 X-Cinch is 100% made in Italy
7
8
F
E
D
C
6
5
B
5
A
8
Via per Ospitaletto, 147 25046 Cazzago S.Martino (Brescia) – ITALY
6
5
Tel.(0039) 030.7255176
Web site: http://www.carbon-ti.com
7
4
4
3
7
4
6
5
3
2
6
5
fig.B
fig.C
3
Fax. (0039) 030.7255261
4
2
fig.A
1
F
4
E
D
C
B
2
A