Amprobe ULD-405 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Датчики безпеки Amprobe ULD-405. Amprobe ULD-405 11 сторінок. Ultrasonic leak detector

Друкувати сторінку

Find Quality Products Online at:

5. MAINTENANCE

5.1 Changing the Receiver Batteries

The ULD-405 uses four 1.5 V AA (LR6) batteries (supplied). To replace the batteries, follow these

steps:

1. Make sure that the Receiver is turned off.

2. Use a screw driver to unscrew the captive screw.

3. Remove the battery cover.

4. Replace the batteries as shown in Figure 5.1. Observe the battery polarity shown in the

battery compartment.

5. Replace the battery cover and secure it with the provided screw.

Figure 5.1: Changing the Receiver batteries

5.2 Cleaning

The only maintenance the ULD-405 requires is inspection and cleaning. Periodically wipe the

exterior with a mild solution of detergent and water. Apply sparingly with a soft cloth and allow to

dry completely before using. Do not use aromatic hydrocarbons, gasoline or chlorinated solvents

for cleaning.

GlobalTestSupply

www.

.com

[email protected]