Amprobe ULD-420 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Датчики безпеки Amprobe ULD-420. Amprobe ULD-420 15 сторінок. Ultrasonic leak detector

Друкувати сторінку

1.888.610.7664

5. MAINTENANCE

5.1 Changing the Receiver Batteries

The ULD-400-R uses four 1.5 V AA (LR6) batteries (supplied). To replace the batteries, follow

these steps:

1. Make sure that the Receiver is turned off.

2. Use a screw driver to unscrew the captive screw.

3. Remove the battery cover.

4. Replace the batteries as shown in Figure 5.1. Observe the battery polarity shown in the

battery compartment.

5. Replace the battery cover and secure it with the provided screw.

Figure 5.1: Changing the Receiver batteries

www.calcert.com

[email protected]