CarcamOne HD 720p Посібник - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник для Відеореєстратори CarcamOne HD 720p. CarcamOne HD 720p 15 сторінок. High definition
Друкувати сторінкуMode selection
The camera starts in external mode that can be used directly for recording. Use the cross
pad's „up"and „down"buttons to change the mode.
Video
Photo
External
Play
Following menus appear:
Video
Standard
15Min
30Min
45Min
60Min
Time Lapse
Photo
Single shot
1 Sec
5 Sec
10 Sec
30 Sec
60 Sec
The motion detector (Art.-No.: FCHD07) or the CarcamOne-cable (Art.No.: CCHD02) is
supported in the external mode. Other sensors to start the camera will be launched in the
future.
SETUP
Press the „M"-button for 3 seconds to enter the setup.
SETUP V 1.0
Language
Date
Time
Timestamp
Video Size
FPS
White Balance
ISO
Exposure
Effects
Contrast
Sharpness
Resolution
Flip Picture
Auto Power Off
Auto Screen Off
Microphone
Light Frequency
Formatting
Reset
Update
Select the mode with the cross pads up and down, confirming by
pressing "Start". For details in the selected mode go further on
pressing the "M" button.
Select the running time of the recording. Confirm selected mode
with "Start". Leave the submenu by pressing the "M" button.
Time Lapse will record with only one frame per second –
specially used for nature recordings. Recommended is the use of
external energy source. (Power Adaptor Art.-No.: FC3016) – This
mode will come with next update.
Activate the serial photo function in the photo mode – select a
picture every second up to every 60 seconds. Confirm the
selected interval with the "Start" button or leave the menu
pressing the "M" button.
Select the language English, German, French or Spanish
Set date
Set time
Activate the timestamp
Select the recording format 720p, 480p
Select the frames per second
Select light temperature and environment
Change ISO setting 100,200,400,800
Brighter Picture to be adjusted here
Choose off, art, sepia, negative, monochrome, vivid
Select soft, standard or hard contrast
Select soft, standard or hard sharpness
Select high, medium or low resolution
Select 180° flip and mirror function here
Select the auto off function
Battery saving to be selected here
On/Off
For indoor recording select 50Hz or 60Hz
Formatting the card
Return to default settings
Update the Firmware
Quick Guide