DPM 5900672652338 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Аксесуари DPM 5900672652338. DPM 5900672652338 20 сторінок. Wireless doorbell

Dzwonek bezprzewodowy

4. The manufacturer is not liable for any damages to persons or property caused by improper use,

contrary to its intended purpose, the technical specifications or the user's manual.

5. Before use check if the device or any of its components is not damaged. Do not use damaged product.

6. Do not open, disassemble or modify the device. All repairs may only be made by an authorized

service center.

7. Use the device indoors (receiver) / outdoors (transmitter). International Protection Rating for the

device is IP20 (receiver), IP44 (transmitter).

8. Do not use the detector immediately after it has been moved from cold to warm space. Wait until it

reaches room temperature.

9. The device should be protected against:

a. dropping and shaking

b. high and low temperatures (receiver)

c. humidity, flooding and splashing (receiver)

d. direct sunlight

e. chemicals

f. and other factors that could affect the device and its operation.

10. The device should be cleaned with a dry and soft cloth. Do not use abrasive powders, alcohol,

solvents, or other strong detergents.

11. Product is not a toy. The device and packaging must be kept out of the reach of children and animals.

Features

Wireless doorbell – requires no bell or cable installation / operating range in open area: max. 150 m

/ 58 sounds / transmission frequency: 433,92 MHz / receiver power supply: AC 230 V ~ 50 Hz /

battery-free transmitter requires no power supply / receiver IP20, transmitter IP44 / colour: white

/ self-learning function

Operating range

The range of wireless transmission of the radio ring signal is up to 150 m in open terrain, when the

transmitter and receiver are in their field of view, without any obstacles between them. The range

depends on the place of installation and the obstacles encountered.

The operating range of the doorbell can be limited by the following obstacles: walls, reinforced concre-

te ceilings, insulation and metal objects, radio and wireless devices (eg. mobile phones, headphones,

loudspeakers, weather stations), devices generating a strong electromagnetic or electric field (eg.

electric motors, transformers, power supplies, computers, high-power overhead power lines, GSM

network transmitters), etc.

Self-learning function

The receiver is paired with a transmitter by facotory. If you need to replace the transmitter, please

follow the instructions below:

1. Connect the receiver to the power supply.

2. Press and hold the pairing button M on the back of the receiver for 5 seconds.

3. Press and hold the button on the transmitter for 30 seconds. When the ringing rings, transmitter