DPM PosiTector Короткий посібник - Сторінка 8

Переглянути онлайн або завантажити pdf Короткий посібник для Вимірювальні прилади DPM PosiTector. DPM PosiTector 10 сторінок. Dew point meter

Bluetooth

Allows the PosiTector to communicate wirelessly with the

PosiTector Desktop Manager (PDM) or with the optional Bluetooth

wireless printer.

Updates

Determines if a software update is available for your instrument

(must be connected to an internet connected PC with PosiTector

Desktop Manager). See: www.defelsko.com/update

Before returning the instrument for service...

1.Install new batteries in the proper alignment as shown within

battery compartment.

2.Examine the surface temperature probe tip for dirt or damage.

3.Ensure the holes in the white humidity/air temperature sensor

are clear.

4.Perform a Reset (Page 4)

If you must return the instrument for service, please fill out and

include the service form located at www.defelsko.com/support

with the instrument.

CAUTION:

To ensure optimal performance of your PosiTector

DPM, do not obstruct the airflow near the air temperature and

humidity sensors. Keep fingers away from the sensor, as body

heat can cause incorrect readings. Allow time for the instrument to

acclimate and for the readings to stabilize when moving the

instrument between different environments.

When using the surface temperature probe, do not use excessive

downward force, and do not drag it sideways. When the instrument

is not in use, place the rubber cap over the surface temperature

sensor to prevent damage.

(Advanced models only)

Returning for Service