AMQ ACTIV-Pro Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу для Внутрішнє оздоблення приміщень AMQ ACTIV-Pro. AMQ ACTIV-Pro 16 сторінок. Sit-to-stand table
Також для AMQ ACTIV-Pro: Посібник з монтажу (12 сторінок), Посібник користувача (7 сторінок), Посібник користувача та усунення несправностей (12 сторінок)

AMQ ACTIV-Pro Посібник з монтажу

Safety Statement

WARNING
This powered, adjustable height desk appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play with the
appliance.
• RISK OF DEATH OR SERIOUS INJURY. Raising
or lowering desk can trap, pinch or crush body
parts or property.
• CRUSH HAZARD - DO NOT PLACE FEET,
LEGS OR OTHER BODY PARTS ON OBJECTS
PLACED UNDER TABLE TOP OR BELOW
MODESTY PANEL.
• DO NOT OPERATE THIS EQUIPMENT Unless
Properly Trained.
• DO NOT ALLOW USE BY CHILDREN or people
unable to understand the risks and to safely
adjust the desk height. Lock handset or remove
and secure power cord when not in use to
prevent children from adjusting the desk
unsupervised.
• INSPECT REGULARLY. Stop using if product is
damaged or has loose parts. Only repair with
AMQ authorized parts and methods.
• MAINTAIN >1" (25mm) GAP ABOVE OBJECTS
ON DESK AT MAX HEIGHT AND BETWEEN
THE DESK & ADJACENT OBJECTS. Locate
desk, accessories, and nearby objects to
allow movement of desktop through full range without pulling cords, trapping body parts, or colliding with
anything (shelves, electrical plugs and cords, door knobs, window sills, storage cabinets, etc.)
• Always lock castors during use to keep adequate clearance between desk and other objects.
Risk of Tip-Over Injury. Before moving on castors:
1. Adjust desk to lowest height.
2. Verify path is clear of obstructions.
3. Remove objects not attached to desk.
4. Restrict monitor arms from moving outside desk perimeter.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 for FCC rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase
the separation between the equipment and receiver. Connect the equipment into an outlet or a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications to this product not authorized by AMQ could void your authority to operate the product.
Activ-Pro Assembly Guide | 3
RISK OF SERIOUS INJURY DUE TO PINCH POINTS, TIPOVER,
OR POTENTIAL COLLAPSE.
NOTE: Desk image
is for reference only.
Table shape and leg
>1"
quantity may change
(25mm)
based on the style
and configuration.
>1"
(25mm)
>1"
(25mm)
?
(877) 801-0307
www.amqsolutions.com
amqsolutions.com
X