AMQ KINEX Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Телефони AMQ KINEX. AMQ KINEX 3 сторінки.

Upgraded Handset — 4 Memory Presets

A. Height Adjustment Buttons

B. Memory Position Buttons

C. Memory Setting Button

D. Digital Display

Programming Memory Presets

Press the up or down arrow to set the worksurface to the desired height.

Press and hold the "M" button until the display blinks. After it starts blinking,

press one of the preset number buttons (1, 2, 3 or 4) on the LED screen.

The table will automatically reset to this height whenever the preset number

is pressed and held until the preset height is reached.

Power Saving Mode - Waking up the Hand Set

Press any button to wake up handset.

Resetting the Base

Simultaneously press the up and down arrows for 5 seconds and the desk will begin to go down.

Hold the up and down arrow buttons simultaneously until the digital display shows "00"

and flashes for 2 seconds.

The beeping sound will indicate that the base is reset.

Note:

Please make sure there is nothing under the base before setting to its lowest level.

If the cable is obstructed it will not reset properly.

For questions or support, please contact AMQ Customer Care

at [email protected] or (877) 801-0370.

764 Walsh Avenue / Santa Clara, CA 95050 (877) 801-0370 amqsolutions.com

KINEX

userGUIDE

Height Ranges:

2-Stage Legs: 27"-46.7"

3-Stage Legs: 22"-48"