Fondis WINE IN25 Інструкція з експлуатації - Сторінка 13

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Кондиціонер Fondis WINE IN25. Fondis WINE IN25 16 сторінок.

Друкувати сторінку
After transport or maintenance, wait for
After transport or maintenance, wait for 24 hours before switching
3. USING THE WINE CONDITIONING UNIT
The thermostat indicates the temperature in the wine cellar with a precision of 2°C. A temperature change
The thermostat indicates the temperature in the wine cellar with a precision of 2°C. A temperature change
The thermostat indicates the temperature in the wine cellar with a precision of 2°C. A temperature change
of the air doesn't mean the same change of temperature of the liquid due to the thermal capacity of the
of the air doesn't mean the same change of temperature of the liquid due to the
of the air doesn't mean the same change of temperature of the liquid due to the
liquid. The temperature is set at 12°C in the factory.
The temperature is set at 12°C in the factory. During installation the set temperature must be
controlled and adjusted as shown in next paragraph if necessary.
controlled and adjusted as shown in next paragraph if necessary.
3.1. Connecting the air conditioner

Connecting the air conditioner WINE IN25

When you plug the unit to the electrical socket, the display indicates the temperature of the cellar :
the unit to the electrical socket, the display indicates the temperature of the cellar :
the unit to the electrical socket, the display indicates the temperature of the cellar :
If the cellar temperature ≥ to the thermostat setting
-
If the cellar temperature≤ to the thermostat setting
-
works.
3.2. Plugging in the wine conditioning unit
3.2.1.

Temperature setting of the air conditioner WINE IN25

Temperature setting of the air conditioner WINE IN25
The setting of the targeted temperature is made on the
USER MANUAL WINE IN25
on the air conditioner.
on
WINE CONDITIONING UNIT WINEMASTER
to the thermostat setting : the fan starts up immediately
≤ to the thermostat setting : the fan doesn't start.
The power outlet must be accessible after installation.
The power outlet must be accessible after installation
The power outlet must be accessible after installation
wine conditioning unit WINE IN25
temperature is made on the thermostat :
Fit the PVC drain and power cable on the
Fit the PVC drain and power cable on the
bracket with the sticker clip delivered with the
bracket with the sticker clip delivered with the
unit.
The flow must be vertical without loop.
The flow must be vertical without loop.
Important :
24 hours before switching
WINEMASTER
During installation the set temperature must be
: the fan starts up immediately
: the fan doesn't start. Only the ventilator
Sticker clip
®
Page 14