AmScope SE308-P Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Мікроскоп AmScope SE308-P. AmScope SE308-P 19 сторінок.

SE300 Series

First, take the styrofoam container out of the cardboard carton and lay it on its side, paying attention

to which side is labeled up. Remove the tape and open the container carefully so as to avoid dropping

and damaging the optical items. Check carefully to ensure that all parts and accessories are intact.

Check the packing list to ensure that you're received all items. Please note that this can vary

depending on which model you've purchased, and is generally listed on www.amscope.com at the

items' details page for your specific model.

Remove the microscope body from the box and remove the plastic protective covering.

Ensure that the item is fully intact, and that the eyepieces are attached on top. They are the black tubes

that you look through the microscope to see your sample.

Remove the cap from the objective lens, if one is present.

Plug in the microscope and turn it on. If no light emerges from the light source, adjust the dimmer

knob near the power switch.

The top light is used to view opaque samples since it illuminates the top of the sample, reflecting light

back up to the objective.

Getting Started