Electrolux AR Series Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Холодильник Electrolux AR Series. Electrolux AR Series 18 сторінок. Refrigeration
Також для Electrolux AR Series: Посібник користувача (18 сторінок)
Друкувати сторінку
Electronic display controls – Electronic models
The electronic display panel consists of an LCD display with
white backlighting and 6 touch buttons. When the power
is first turned on, the display with backlighting will come on.
If no buttons have been pressed and the fridge door is
closed the backlighting will turn off after 30 seconds.
NOTE: If no buttons have been pressed for approximately
60 seconds, there may be a delay of up to 2 seconds before
the display reacts. This is normal and is to prevent accidental
changes to settings.
Controlling the temperature
We recommend that when you start your refrigerator for the first
time, the temperature for the refrigerator is set to 3°C and the
freezer to -18°C. If you want to change the temperature, follow
the instructions below. Make only small adjustments and wait
24 hours to see if it's correct. Checking the softness of ice cream
is a good indication if your freezer is the right temperature, while
feeling the coldness of water kept in the refrigerator is a good
way of checking the temperature of the food compartment.
NOTE: When you set a temperature, you set an
average temperature for the whole refrigerator cabinet.
Temperatures inside each compartment may vary,
depending on how much food you store and where you
place it. High or low room temperature may also affect the
actual temperature inside the refrigerator.
Changing the freezer temperature
Press the freezer button to make the freezer
colder in 1°C steps. Once the maximum of
-23°C is reached, the display will return to
-14°C with the next press of the button. The bar graph gets
smaller with colder freezer settings.
Changing the refrigerator temperature
Press the fridge button to make the
refrigerator colder in 1°C steps. Once 0°C is
reached, the display will return to 7°C with
the next button press. The bar graph gets smaller with
colder refrigerator settings.
Fast freeze function
Use the fast freeze function when you add a
large amount of food to the freezer
compartment. This freezes the food quickly
but does not affect the temperature in the refrigerator
compartment. To use this function, press the fast freeze
button once. An animated icon will light up. The fast freeze
function will now operate for 90 minutes. If you want to turn
the fast freeze function off before 90 minutes have passed,
simply press the fast freeze button again. The icon will
disappear and the freezer will return to normal operation.
electrolux refrigeration electronic display controls - electronic models 4
Freezer temperature alarm
the freezer door being left open or warm food being placed
too close to the temperature sensor, a buzzer will sound.
The icon adjacent to the alarm reset button, the freezer set
temperature and bar graph will all flash, until the alarm reset
button is pressed. Once pressed, the alarm disable icon
adjacent to the alarm button will illuminate for 50 minutes,
or until the temperature drops to an acceptable level.
Make sure nothing is holding the freezer door open and
move any warm food away from the temperature sensor. If
the freezer is still too warm after 50 minutes, the alarm will
sound again, indicating that something may be wrong with
the refrigerator.
NOTE:
The freezer temperature alarm can be reset for 12 hours
by pressing the alarm reset button continuously for 10
seconds.
Door alarm
If the fridge door is left open for more than two minutes, the
alarm will buzz and an arrow pointing to an open door will
flash, along with the temperature setting and bar graph.
If you want to leave the door open while you load the
refrigerator, you can turn the alarm off for 8 minutes by
pressing the alarm reset button.
Child Lock
buttons together.
Drinks chill timer
to a maximum of 30 minutes. To set, simply press the
drinks chill button repeatedly for the number of minutes (in
5-minute intervals). Once set, an animated icon appears
beside the drinks chill button, with a timer that counts down
one minute at a time.
You can change the time or turn the timer off even after the
countdown has started. A buzzer will tell you when the time
is finished and the icon will flash until the alarm reset button
is pressed.
If your drink is not cold enough, reset the drinks chill
function (remembering the drink is already partially chilled).
Suggested chilling times:
• 10 minutes for cans of drink
• 20 minutes for bottles of wine
• 30 minutes for bottles of soft drink.
If the alarm sounds for no apparent reason,
check whether anything is keeping the door
open. If the freezer becomes too warm due to
Press and hold the freezer and
fridge buttons together to
activate the child lock. This will
disable the display to prevent
accidental changes to settings.
To turn the child lock off, press
and hold the freezer and fridge
The drinks chill timer is used to quickly chill a
bottle. Place the bottle in the freezer and the
timer can be set for a minimum of 5 minutes