Advanced Card ACR100I Довідковий посібник - Сторінка 14
Переглянути онлайн або завантажити pdf Довідковий посібник для Зчитувач карток Advanced Card ACR100I. Advanced Card ACR100I 20 сторінок.
Друкувати сторінкуOffset
14
Protocol Data Structure for Protocol T=1 (dwLength=00000007h)
Offset
10
bmFindexDindex
11
BmTCCKST1
BGuardTimeT1
12
13
BWaitingIntegerT1
14
15
16
The response to this message is the RDR_to_PC_Parameters message.
ACR100I – Reference Manual
Version 1.00
Field
Size
bClockStop
1
Field
Size
1
1
1
1
bClockStop
1
bIFSC
1
bNadValue
1
Value
Description
ICC Clock Stop Support
00h = Stopping the Clock is not allowed
01h = Stop with Clock signal Low
02h = Stop with Clock signal High
03h = Stop with Clock either High or Low
Value
Description
B7-4 – FI – Index into the Table 7 in
ISO/IEC 7816-3:1997 selecting a clock
rate conversion factor.
B3-0 – DI – Index into the Table 8 in
ISO/IEC 7816-3:1997 selecting a baud
rate conversion factor.
B7-2 – 000100b
B0 – Checksum type (b0=0 for LRC,
b0=1 for CRC
B1 – Convention used (b1=0 for direct,
b1=1 for inverse)
Note: The CCID ignores this bit.
Extra Guardtime (0 to 254 etu between
two characters). If value is FFh, then
guardtime is reduced by 1 etu.
B7-4 = BWI values 0-9 valid
B3-0 = CWI values 0-Fh valid
ICC Clock Stop Support
00h = Stopping the Clock is not allowed
01h = Stop with Clock signal Low
02h = Stop with Clock signal High
03h = Stop with Clock either High or Low
Size of negotiated IFSC
00h
Only support NAD = 00h
Page 14 of 20
www.acs.com.hk