Bosch Ascenta SHE5AM02UC Інструкція з ремонту - Сторінка 48

Переглянути онлайн або завантажити pdf Інструкція з ремонту для Посудомийна машина Bosch Ascenta SHE5AM02UC. Bosch Ascenta SHE5AM02UC 50 сторінок. Quick reference instructions
Також для Bosch Ascenta SHE5AM02UC: Інструкція з монтажу Посібник з монтажу (21 сторінок), Енергетичний посібник (2 сторінок), Початок роботи (2 сторінок), Інструкція з ремонту (27 сторінок)

DW Symptoms

Error Code Display

(seen

during wash cycles)

No drying

No rinse aid

Dispenser rinse aid setting =

Extra Dry Heat option hasn't

been turned on

Washability issue (heat

Clogged spray arms or filters.

pump runs, but dishes

Spray arms not rotating

still dirty)

Dishwasher won't start

Door is ajar

Heat pump has failed

Drain pump has failed

702_58300000130262_ara_en_c

Error Code LED's --

(from cs

Active / Clean / Sanitized

test program)

Solution

Measure voltage between outer most dispenser terminals (1-3 on e3). If

≈ 13VDC, replace dispenser. If not, replace operating module.

Educate customer on using and refilling rinse aid.

Set rinse aid setting to "4" if it is at "0".

Activate Extra Dry Heat option, if it's not activated and is available on the

dishwasher.

Remove debris / obstructions from filter and spray arms.

Make sure spray arms are properly attached and rotate freely.

Make sure spray arms are properly aligned with the supply tube.

Educate customer on closing door securely (see Section 6.3.1.1).

Replace faulty heat pump (see section 6.3.1.2).

Replace faulty drain pump (see section 6.3.1.2).

Page 48 of 50