Bosch Dishwahser Інструкція з використання Посібник з використання - Сторінка 17

Переглянути онлайн або завантажити pdf Інструкція з використання Посібник з використання для Посудомийна машина Bosch Dishwahser. Bosch Dishwahser 26 сторінок.

Друкувати сторінку

Fault finding

Resolving minor problems

yourself

Experience has shown that you can

resolve most problems that arise during

normal daily usage yourself, without

having to call out a service engineer. Not

only does this save costs, but it also

means that the appliance is available for

use again that much sooner. The following

list of common occurrences and their

remedies should help you identify the

causes of most problems.

Problems ...

... when the appliance is

switched on

Appliance does not start up

Fault with fuse in mains electricity

supply.

Plug not inserted in wall socket.

Appliance door not closed

properly.

Programme button has not been

pressed.

Water tap not turned on.

Blocked strainer in water intake

hose.

The strainer is situated in the

Aquastop or supply-hose

connection.

Caution

Do not forget that repairs

should only be carried out by a

qualified specialist. Improper

repairs can lead to

considerable equipment

damage as well as danger to

the user.

... with the appliance itself

Lower spray arm rotates with

difficulty

Spray arm is blocked by small

items or food remains.

Lid in detergent compartment

cannot be closed

Detergent compartment has been

overfilled.

Mechanism is clogged with

remnants of detergent.

Indicator lamps do not extinguish

after washing has finished.

Indicator lamps do not extinguish

after washing has finished

Main switch is still set to ON.

Remnants of detergent stuck inside

dispenser

Compartment was damp when it

was filled up with detergent.

Compartment must be dry before

detergent is added.

Water remains inside appliance

after programme has ended

Blockage or kink in drainage hose.

Pump is jammed.

Filters are blocked.

The programme is still running.

Wait for the programme to end

(programme-end display will

illuminate).

Perform "Reset" function.